Allied Telesis AT-S63 - Manual (Page 533)

533
Chapter 30
GARP VLAN Registration Protocol
Commands
This chapter contains the following commands:
ˆ “DISABLE GARP” on page 534
ˆ “ENABLE GARP” on page 535
ˆ “PURGE GARP” on page 536
ˆ “SET GARP PORT” on page 537
ˆ “SET GARP TIMER” on page 538
ˆ “SHOW GARP” on page 540
ˆ “SHOW GARP COUNTER” on page 541
ˆ “SHOW GARP DATABASE” on page 543
ˆ “SHOW GARP GIP” on page 544
ˆ “SHOW GARP MACHINE” on page 545
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on this feature, refer to Chapter 26,
“GARP VLAN Registration Protocol” in the AT-S63 Management
Software Menus Interface User’s Guide.