Allied Telesis AT-S63 - Manual (Page 400)

Chapter 25: SNMPv3 Commands
400 Section IV: SNMPv3
notifyview Specifies a Notify View Name that allows the users
assigned to this security group to send traps
permitted in the specified View. This is an optional
parameter.
Description
This command clears the specified fields in an SNMPv3 Access Table
entry.
Examples
The following command clears the readview parameter in a security group
called “Engineering” which has a security model of the SNMPv3 protocol
and a security level of privacy.
clear snmpv3 access=Engineering securitymodel=v3
securitylevel=privacy readview
The following command clears the values in the readview, writeview, and
notifyview parameters in a security group called “SystemTest.” This group
has a security model of the SNMPv3 protocol and a security level of
authentication.
clear snmpv3 access=SystemTest securitymodel=v3
securitylevel=authentication readview writeview notifyview