Allied Telesis AT-S63 - Manual (Page 515)

515
Chapter 29
Port-based, Tagged, and Multiple Mode
VLAN Commands
This chapter contains the following commands:
ˆ “ADD VLAN” on page 516
ˆ “CREATE VLAN” on page 518
ˆ “DELETE VLAN” on page 521
ˆ “DESTROY VLAN” on page 523
ˆ “SET SWITCH INFILTERING” on page 524
ˆ “SET SWITCH MANAGEMENTVLAN” on page 525
ˆ “SET SWITCH VLANMODE” on page 526
ˆ “SET VLAN” on page 528
ˆ “SHOW VLAN” on page 529
Note
Remember to use the SAVE CONFIGURATION command to save
your changes on the switch.
Note
For background information on tagged and port-based VLANs, and
ingress filtering, refer to Chapter 25, “Port-based and Tagged
VLANs” in the AT-S63 Management Software Menus Interface
User’s Guide. For background information about the multiple VLAN
modes, refer to Chapter 27, “Multiple VLAN Modes” in the AT-S63
Management Software Menus Interface User’s Guide.