Allied Telesis AT-S63 - Manual (Page 536)

Chapter 30: GARP VLAN Registration Protocol Commands
536 Section VI: Virtual LANs
PURGE GARP
Syntax
purge garp=gvrp
Parameter
garp Specifies the GARP application you want to reset.
The only GARP application supported by AT-S63
management software is GVRP.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command disables GVRP and returns all GVRP parameters to their
default settings. All GVRP-related statistics counters are returned to zero.
Example
The following command disables GVRP and returns all GVRP parameters
to their default values:
purge garp=gvrp