Clear snmpv3 notify – Allied Telesis AT-S63 User Manual
Page 402
Advertising
Chapter 25: SNMPv3 Commands
402
Section IV: SNMPv3
CLEAR SNMPV3 NOTIFY
Syntax
clear snmpv3 notify=
notify
tag
Parameters
notify
Specifies the name of an SNMPv3 Notify Table
entry, up to 32 alphanumeric characters.
tag
Specifies the notify tag name, up to 32
alphanumeric characters.
Description
This command clears the value of the tag parameter in an SNMPv3 Notify
Table entry.
Examples
The following command deletes the value of the tag parameter in an
SNMPv3 Notify Table entry called “hwengtrap:”
clear snmpv3 notify=hwengtraptag tag
The following command deletes the value of the tag parameter in an
SNMPv3 Notify Table entry called “hwenginformtag:”
clear snmpv3 notify=hwenginform tag
Advertising