Allied Telesis AT-S63 - Manual (Page 89)

89
Chapter 5
Simple Network Time Protocol (SNTP)
Commands
This chapter contains the following commands:
ˆ “ADD SNTPSERVER PEER|IPADDRESS” on page 90
ˆ “DELETE SNTPSERVER PEER|IPADDRESS” on page 91
ˆ “DISABLE SNTP” on page 92
ˆ “ENABLE SNTP” on page 93
ˆ “PURGE SNTP” on page 94
ˆ “SET DATE” on page 95
ˆ “SET SNTP” on page 96
ˆ “SET TIME” on page 97
ˆ “SHOW SNTP” on page 98
ˆ “SHOW TIME” on page 100
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on SNTP, refer to Chapter 3, “Basic
Switch Parameters” in the AT-S63 Management Software Menus
Interface User’s Guide.