Enable mldsnooping – Allied Telesis AT-S63 User Manual
Page 381
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
Section III: IGMP Snooping, MLD Snooping, and RRP Snooping
381
ENABLE MLDSNOOPING
Syntax
enable mldsnooping
Parameters
None.
Description
This command activates MLD snooping on the switch.
Example
The following command activates MLD snooping:
enable mldsnooping
Equivalent Command
set ipv6 mldsnooping snoopingstatus=enabled
For information, refer to “SET IPV6 MLDSNOOPING” on page 382.
Advertising