Avaya P580 - Manual (Page 203)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 5-23
Configuring Port Parameters
CLI Command
To configure ports on a Fast Ethernet module using the CLI, enter
the following command from Configure mode:
<configure># set port <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for more details about this
command.
Using the All Ports Configuration Window
You can apply the same parameter settings on all of a module’s ports
using the All Ports Configuration dialog box.
To configure all ports on a module:
1. Select Configuration from the Modules & Ports group on
the Web Agent window. The Module Information dialogue
box opens (Figure 5-1).
2. Select the port number from the Ports column for that
module. The Physical Port Configuration dialog box for that
module opens (Figure 5-2 for Gigabit modules and Figure 5-4
for 10/100 modules).
3. Select All Module Ports Configuration. The All Ports
Configuration dialog box opens (Figure 5-6).
Figure 5-6. All Ports Configuration Dialog Box