Adding entries to the aft manually, Adding entries to the aft manually -21 – Avaya P580 User Manual
Page 251
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
6-21
Managing the Address Forwarding Table
Searching the
Switch AFT
Using the CLI
To search the switch AFT using the CLI, enter the following
command in Configure mode:
<configure># show aft entry
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
Adding Entries to the AFT Manually
You can add entries to the AFT manually using the Web Agent or
the CLI.
Adding Entries
to the AFT
Manually Using
the Web Agent
To add an AFT address manually using the Web Agent:
1. Select Entry Configuration from the Address Forwarding
Table group in the Web Agent window. The Static Address
Configuration dialog box opens (Figure 6-16).
Figure 6-16. Static Address Configuration Dialog Box.
2. Enter the MAC address that you want to add to the table in
the MAC Address Value field.