Avaya P580 - Manual (Page 290)

9-4 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Displaying Existing IP Interfaces
When you create an IP interface, you activate a location in the
switch that communicates between IP and the embedded software
of the switch. You can create an IP interface using either the Web
Agent or the CLI.
Display Existing
IP interfaces
Using the Web
Agent
To display, modify, delete a previously created IP interfaces or to
create a new IP interface using the Web Agent:
1. Select Interfaces from the Routing > IP > Configuration
group on the Web Agent window. The IP Interfaces dialog
box opens (Figure 6-26- split in three due to size).
Figure 6-26. IP Interfaces Dialog Box