Avaya P580 - Manual (Page 442)

11-24 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Chapter
Displaying OSPF Links
The OSPF link display provides information on the currently active
OSPF links. You can display the OSPF using either the Web Agent or
the CLI.
Using the Web
Agent
To display OSPF links using the Web Agent:
1. Select Links from the Routing > IP > OSPF group on the
Web Agent window. The OSPF Links dialog box opens
(Figure 6-87).
Figure 6-87. OSPF Links Dialog Box
2. Refer to Table 6-59 for an explanation of the OSPF Links
dialog box parameters:
Using the CLI
To display OSPF links using the CLI, enter the following command
from Enable mode:
># show ip ospf interface
># show ip ospf virtual-links
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3 for details about this command.
Table 6-59. OSPF Link Parameters
Parameter Displays the...
State State of the OSPF link.
IP Address IP address of the OSPF link.
Area ID Area ID (IP address) associated with the OSPF link.
Type Type of OSPF link.
DR Router ID Router ID of the designated router.
DR Address IP address of the designated router.
BDR Address IP address of the designated border router.