Avaya P580 - Manual (Page 460)

12-4 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Configuring IPX Routing Globally
You can configure IPX routing globally using the Web Agent or the
CLI.
Web Agent
Procedure
To Enable or Disable IPX routing globally using the Web Agent:
1. Select Global Configuration from the Routing > IPX >
Configuration group on the Web Agent window. The IPX
Global Configuration dialog box opens (Figure 12-2).
Figure 6-93. IPX Global Configuration Dialog Box
2. Configure IPX Routing Global Configuration dialog box
parameters to make your switch an IPX router. Refer to Table
Table 6-65 for an explanation of the dialog box parameters.
Table 6-65. IPX Routing Global Configuration Dialog Box Parameters
Parameter Allows you to ...
IPX Routing Select Disable to prevent IPX from routing globally. The
default value is Enable.
Use Default
Route Select Enable if you know the default route. The default
value is Disable.
RIP Select Disable to prevent IPX RIP from routing globally.
This affects all IPX interfaces set up to use the IPX RIP
routing protocol. The default value is Enable.
SAP Select Disable to prevent IPX SAP from routing globally.
This affects all IPX interfaces set up to use the IPX SAP
routing protocol. The default value is Enable.