Rice Lake PR5220 Ethernet Transmitter - Manual (Page 22)

Installing the Instrument PR 5220 Instrument Manual
EN-22 Sartorius
3.1.2.1 Connecting of a PR 5110 Remote Display
Four-wire transmission, point to point, full duplex (simultaneous sending and receiving possible) with
PR 5110 remote display.
Note:
When replacing PR 1627/PR 1628 with PR 5110, note that the pin assignment must be
attended, see Chapter 16.1.
Description see instrument manual PR 5110.
Switch settings Switch settings
ON: S1, S2, S3 ON: S2
OFF: S4, S5 OFF: S1, S3,
S4 is not relevant!
Configuration PR 5110 Configuration PR 5220/00
-  -  – 
-  –  - 
-  –  - 
- [Serial ports parameter]-[Remote display]-
[Builtin RS485]
[Param]: [Mode]-[single transmitter]
The following operations are possible from the connected remote display:
-
Switch over to another weighing point
- Indicate current value type
- Set tare
- Reset tare
- Set zero
- Start Print