Rice Lake PR5220 Ethernet Transmitter - Manual (Page 99)

PR 5220 Instrument Manual Commissioning
Sartorius EN-99
4.7.3 Fieldbus Parameters
Setup
Serial ports parameter
Operating parameter
Fieldbus parameter
Press and
to select [Fieldbus parameter]
This menu item can only be selected if the instrument is a PR 5220/01, a PR 5220/04, PR 5220/06 or
PR 5220/07 version.
The instrument version automatically determines the corresponding protocol:
-
[Profibus-DP] for PR 5220/01
- [DeviceNet] for PR 5220/04
- [ProfiNet I/O] for PR 5220/06
- [EtherNet-IP] for PR 5220/07
Dependent on the interface type, additional parameters are required:
[Profibus-DP]
Setup/ Fieldbus parameter
Protocol Profibus-DP
Profibus-DP Address 1 Enter address.
[DeviceNet]
Setup/ Fieldbus parameter
Protocol DeviceNet
DeviceNet baudrate 500k Press
to select 500, 250 or 125 k.
DeviceNet MAC-ID 1 address 1 ... 62.
[ProfiNet I/O]
Setup/ Fieldbus parameter
Fieldbus protocol ProfiNet I/O
Use DHCP off Select
on/off.
IP address 192.168.1.1 Enter IP address.
Subnet mask 255.255.255.0 Enter Subnet mask.