Rice Lake PR5220 Ethernet Transmitter - Manual (Page 44)

Commissioning PR 5220 Instrument Manual
EN-44 Sartorius
4.3.3 Searching the Instrument in the Network Using 'IndicatorBrowser'
The address can be determined using the 'IndicatorBrowser' program (on the enclosed CD-ROM).
Install and start the 'IndicatorBrowser'.
The ’IndicatorBrowser’ searches within the current
network ID, e.g. 169.254. and 172.24., on all available
network adaptors in the PC (several
possible/recommended, e.g. LAN global/LAN local)
Result:
List of all connected devices with status:
search??? – online - byebye – lost???
Click the button to open the ’standard’
Internet Browser, e.g. Microsoft InternetExplorer,
directly with the marked IP address.
Click the button
to re-start the network search run.
Waiting 2…3 minutes is essential!
Click the button to localize the associated device.
Short-term visual response of the device:
Regular running light in LED 1, 2, 3.
Acoustic signal for each device that was found
’online’.
If the browser window remains empty after a minimum waiting time, or if the expected device is not listed, the
network ID of the local notebook/PC must be checked and changed, if necessary!
Note: Only certain Sartorius devices are supported by the ’IndicatorBrowser’!