Parameterizing and generating the ip core, Parameterizing and generating the ip core -7 – Altera JESD204B IP User Manual
Page 21
• specify the working directory for the project.
• assign the project name.
• designate the name of the top-level design entity.
1. From the Windows Start menu, select Programs > Altera > Quartus II <version> to launch the
Quartus II software. Alternatively, you can use the Quartus II Web Edition software.
2. On the File menu, click New Project Wizard.
3. In the New Project Wizard: Directory, Name, Top-Level Entity page, specify the working directory,
project name, and top-level design entity name. Click Next.
4. In the New Project Wizard: Add Files page, select the existing design files (if any) you want to include
in the project.
(8)
Click Next.
5. In the New Project Wizard: Family & Device Settings page, select the device family and specific
device you want to target for compilation. Click Next.
6. In the EDA Tool Settings page, select the EDA tools you want to use with the Quartus II software to
develop your project.
7. Review the summary of your chosen settings in the New Project Wizard window, then click Finish to
complete the Quartus II project creation.
Parameterizing and Generating the IP Core
Before you begin
Refer to
for the IP core parameter values and description.
1. In the IP Catalog (Tools > IP Catalog), locate and double-click the name of the IP core you want to
customize.
2. Specify a top-level name for your custom IP variation. This name identifies the IP core variation files
in your project. If prompted, also specify the target Altera device family and output file HDL
preference. Click OK.
3. In the Main tab, set the following options:
• Jesd204b wrapper
• Data path
• Jesd204b subclass
• Data Rate
• PCS Option
• PLL Type
• Bonding Mode
• PLL/CDR Reference Clock Frequency
• Enable Bit reversal and Byte reversal
• Enable Transceiver Dynamic Reconfiguration
• Enable Altera Debug Master Endpoint
• Enable Capability Registers
(8)
To include existing files, you must specify the directory path to where you installed the JESD204B IP core.
You must also add the user libraries if you installed the MegaCore IP Library in a different directory from
where you installed the Quartus II software.
UG-01142
2015.05.04
Parameterizing and Generating the IP Core
3-7
Getting Started
Altera Corporation