Basler Electric BE1-BPR User Manual
Page 136
6-8
BE1-BPR Communications
9272000990 Rev J
OUT Command
Purpose:
Pulses outputs on or off for testing purposes.
Syntax:
OUT[x=<1/0>/DISABLE]
Reference:
Section 4, Functional Description, Maintenance, Output Contact Testing
PCLK Command
Purpose:
Reads or changes the time clock time/date format.
Syntax:
PCLK[=<date_format(M/D)>,<time_format(12/24)>]
Reference:
Section 4, Functional Description, Software Functional Description, Maintenance, Time
And Date
PDIAG Command
Purpose:
Reads or programs service diagnostic alarms.
Syntax:
PDIAG[=<DIAG1 mask>,<DIAG2 mask>]
Reference:
Section 4, Functional Description, Software Functional Description, Relay Status
PDISPLAY Command
Purpose:
Reads or programs the default HMI display screen.
Syntax:
PDISPLAY[=<default_menu>,<default_screen>]
Reference:
Section 4, Functional Description, Software Functional Description, Maintenance, Default
HMI Display Screen
PHOLD Command
Purpose:
Reads or programs the output hold timer mask.
Syntax:
PHOLD[=<#####>]
Reference:
Section 4, Functional Description, Software Functional Description, Relay Setup,
Reclosing
POSC Command
Purpose:
Reads or programs the number of oscillograph fault records saved.
Syntax:
POSC[=x]
Reference:
Section 4, Functional Description, Software Functional Description, Fault Log
PTARGET Command
Purpose:
Reads or programs the target operation and display.
Syntax:
PARGET[=<iiiiiii>,<ooooo>]
Reference:
Section 4, Functional Description, Software Functional Description, Target Data,
TARGETS Screen
PTLOG Command
Purpose:
Reads or changes timer log and alarm logic.
Syntax:
PTLOG [#[=<logic term>,<alm_type>,<alm_time>]]
Reference:
Section 4, Functional Description, Software Functional Description, Timer Log
PU Command
Purpose:
Reads or changes the fault detector pickup levels
Syntax:
PU[x] [=<level>[,<cycles>]]
Reference:
Section 4, Functional Description, Software Functional Description, Relay Setup, Fault
Detector