Basler Electric BE1-BPR - Manual (Page 3)

9272000990 Rev J BE1-BPR Introduction i
INTRODUCTION
This instruction manual provides information about the operation and installation of the BE1-BPR Breaker
Protection Relay. To accomplish this, the following information is provided:
 General Information and Specifications
 Application
 Human-Machine Interface
 Functional Description
 Installation and Maintenance
 Calibration and Testing
WARNING!
To avoid personal injury or equipment damage, only qualified personnel should
perform the procedures in this manual.
NOTE
Be sure that the BE1-BPR is hard-wired to earth ground with no smaller than 12
AWG copper wire attached to the ground terminal on the rear of the unit case.
When the BE1-BPR is configured in a system with other devices, it is
recommended to use a separate lead to the ground bus from each unit.