Daktronics OmniSport 2000 Timing Console - Manual (Page 119)

Diving Mode Operation, Menus & Settings 101
MENU-SCOREBOARD
2-RTD/MATRI X
MENU-RTD/MATRI X
1-RTD/OFFSET
MENU-SETUP
3-COMM PORTS
MENU-COMM PORTS
1-SCBD OUTPUTS
7.12 Setup RTD/Matrix Scoreboard Menu
This menu configures how the console will output Real-
Time Data (RTD) to matrix displays.
RTD Offset
This menu will add an offset to the RTD output to the
matrix display.
Use [↑][↓] to toggle through the RTD offset settings (0K, 5K, 10K or 15K). Each setting adds
5000 to the original item numbers, up to 15000. The default setting is 0K (no offset).
To save the setting, press [ENTER].
When to use this:
 Data from more than one pool/OmniSport 2000 is going to one display.
 If using a Daktronics M2, M3, or V-Link ® controlled display, this menu allows
multiple RTD input directly into the display.
7.13 Setup Comm Ports Menu
The following Comm Ports menus select the protocol used
for transmitting data to the display and communicating
with a results program.
Scoreboard Outputs
Select Scoreboard Outputs to assign a protocol to transmit
data from outputs J2 and J3 on the console.
Use [←][→] to select Multidrop, Multiline, or Omega protocol, depending on the type of
display used, and then press [ENTER] to save. Multicast is reserved for future use.
When to use this:
 The OmniSport 2000 supports several generations of displays. Currently there are
two different types of Daktronics protocols: Multidrop and Multi-line.
 The current generation of displays for aquatics/track is the SW-2000 series. This
generation requires a protocol plug to determine which protocol it is receiving.
To test which protocol is used, unplug the signal to the display from the back of the
console. Cycle power to the display. When it powers up, it will display either a P0 or
P1 on the left two digits:
o
P0 – set the console to Multidrop
o P1 – set the console to Multiline
 If the display is one manufactured by Omega, set the console to Omega.
From Main Menu – [4]>[3]>[1]
From Main Menu – [4]>[2]>[2]
From Main Menu – [4]>[2]>[2]>[1]
From Main Menu – [4]>[3]
MENU-RTD/MATRI X
RTD OFFSET: 5K*
MENU-COMM PORTS
SCBD: MULTI DROP*