Daktronics OmniSport 2000 Timing Console - Manual (Page 156)

138 OmniSport 2000 Pro Synchronized Swimming Software
To install the Pro Diving software from a CD:
1. Insert the software CD into the computer’s CD-Rom drive.
2. If the CD does not open automatically, go to
Start > Run to open the window shown in
Figure 152. Type the directory of the CD-Rom
drive (usually “D:”) and click OK.
3. Open the “Pro Software” folder, followed by
the “Synchronized Swimming” folder.
4. Open the “Ver X.X.X” folder, where the X’s
represent the most recent software version.
5. Double-click the “OmniSport PRO Synchro”
file to begin the installation procedure.
6. Follow the onscreen instructions to complete the installation.
10.3 Opening & Exiting the Application
To open the application:
 Double-click the Synchronized Swimming icon on the desktop.
 Click the Start menu and navigate to All Programs > Daktronics > OmniSport Pro >
Synchro.
To exit the application:
 Click the exit button in the upper right corner of the window.
 Left- or right-click the icon in the upper left corner of the window and click Close.
 Go to File > Exit.
10.4 Registering the Software
After installing the Pro Swimming software, users are given a 30 day trial period (Demo
Mode). Each time the program is opened, the number of days remaining for the free trial is
shown. To use the software without registering, click Continue.
When the 30 day trial period is over, users must register the
software, as described below:
1. On the registration window (Figure 153), make a note
of the Serial #. Call 1-800-325-8766 and present this
information, or email it to
[email protected] .
Upon proof of purchase, a registration code will be
provided.
2. Back on the Register OmniSport Pro window, type in
the registration code.
3. Click Register.
Note: Installing the software on a separate computer requires
a new Registration Code.
Figure 152: Run Window
Figure 153: Registration