Daktronics OmniSport 2000 Timing Console - Manual (Page 301)

Console & Software Revision History 249
 Added ability to display the start list and reaction times on the RTD Port by lane
when the mode is set to Place order.
 Modified position of ‘F’ and ‘*’ on the printouts.
Water Polo
 Added address 15 and 16 to show up to three home/guest player-penalties on
dedicated displays.
Version 5.2.2 - Release date: 2 February 2005
Swimming
 Limited relay exchanges to Near end only.
Version 5.2.23 - Release date: 23 February 2005
Swimming
 Added configuration for showing start reaction times on the RTD Port.
 Modified configuration to show ‘BTN/DAKTRONICS’ and ‘OMEGA PLATFORM’
for Relay Take-Off in the Setup-Timer menu.
 Limited function of relay platforms to relay events only when event order is
downloaded from the Meet Manager or Pro application.
 Decreased number of relay exchanges from 6 back to 3 and limited the active length
numbers to 4x50, 4x100, etc.
Water Polo
 Added control of horn segment on 7-E of address 1.
 Added additional columns for shot clock and control of horn segment on 5-H of
address 2.
 Increased priority of the update for the game clock, shot clock and horn.
Version 5.3.15 - Release date: 15 March 2005
Track
 Added ability to page through all competitors into Non-Lane timing mode.
Version 5.4.21 - Release date: 21 April 2005
General
 In die C3 of 80C390, the SMOD_1 bit for Serial Port 1 seems to be ignored and the
baud rate is always doubled (WDCON.7=1) so the reload values of Timer 1 were
adjusted.
Version 5.5.19 - Release date: 19 May 2005
General
 Added a selection for Omega on the scoreboard output.
 Implemented OSM6 protocol for swimming, diving, pace clock, water polo, and
synchronized swimming.
 Implemented OTR7 protocol for track.
Version 5.9.30 - Release date: 30 September 2006
Swimming
 Changed the menu setting text for relay platforms from saying “Arming Delay” to
“Arm Time”.
Track
 Changed the menu setting text for running time selection on a single line display
from “no splits” - “splits” to “continuous” - “finish”.