Daktronics OmniSport 2000 Timing Console - Manual (Page 59)

Swimming Mode Menus & Settings 41
MENU-MAI N
1-SCBD MENU
Section 5: Swimming Mode Menus & Settings
The console saves the settings and does not need to be re-configured once it is set. The quickest
way to confirm settings is press [MENU]>[3]>[3]>[ENTER]. Re-confirm the settings before each meet
by saving the printout from the previous meet.
5.1 Menu Navigation
Press [MENU] to access the Main Menu screen.
The swimming mode has five menus, described in
following sections.
Users may navigate through the menus by using the arrow keys or by pressing the number
that precedes the menu title. To return to the main menu at any time, press [MENU] twice.
 Use [↑][↓] to scroll through the menus. When a selection is made, press [ENTER] to
accept the menu displayed on the right LCD. Pressing an arrow is equivalent to
using a number when in menu mode.
 The second method uses numbers to go directly to a desired menu choice. Enter the
number sequence from the list in Appendix C using the [1]-[9] keys. For example,
pressing [4]>[2]>[5] from the main menu prompts the operator to enter a new Arming
Delay. Daktronics provides a laminated copy of the OmniSport 2000 Timing Console
Quick Reference Guide, ED-13584 (Figure 65). Keep it next to the console during a
meet for convenience.
Each operator will find his/her own method that works best. Remember that when using
either navigation method, pressing [CLEAR] at any time will go back to the previous
function or menu. Pressing the [YES] and [NO] keys is the same as [ENTER] and [CLEAR],
respectively.
Note: In this manual, LCD illustrations aligned to
the right indicate menu location while the set-up
actions are shown on the screens to the left. Each
step is illustrated as the console’s right LCD
prompts. The keystrokes to get to the menu
shown are indicated below that menu.
Figure 65: Swimming Menu Navigation
Main Menu screen