Super Systems 20PQ - Manual (Page 157)

A. 3
Run time group 4 [r.dxx]
PARAMETER DEFAULT VALUE
Pb = 4.0 %
HYS = 0.5 %
ti = 4.00 mm.ss
td = 1.00 mm.ss
IP = 50.0 (If only one control output is configured).
0.0 (If two control outputs, without split range,
are configured).
r.Gn = 1.00
OLAP = 0
Cn.Ac = rEV
Pb 1 = 4.0 %
HYS 1 = 0.5 %
ti 1 = 4.00 mm.ss
td 1 = 1.00 mm.ss
IP 1 = 50.0 (If only one control output is configured).
0.0 (If two control outputs, without split range,
are configured).
r.Gn 1 = 1.00
OLP.1 = 0
Pb 2 = 4.0 %
HYS 2 = 0.5 %
ti 2 = 4.00 mm.ss
td 2 = 1.00 mm.ss
IP 2 = 50.0 (If only one control output is configured).
0.0 (If two control outputs, without split range,
are configured).
r.Gn 2 = 1.00
OLP.2 = 0
Pb 3 = 4.0 %
HYS 3 = 0.5 %
ti 3 = 4.00 mm.ss
td 3 = 1.00 mm.ss
IP 3 = 50.0 (If only one control output is configured).
0.0 (If two control outputs, without split range,
are configured).
r.Gn 3 = 1.00
OLP.3 = 0
Pb 4 = 4.0 %
HYS 4 = 0.5 %
ti 4 = 4.00 mm.ss
td 4 = 1.00 mm.ss
IP 4 = 50.0 (If only one control output is configured).
0.0 (If two control outputs, without split range,
are configured).
r.Gn 4 = 1.00
OLP.4 = 0
XkP-A-C2.P65 10/30/01, 9:44 AM 3