Super Systems 20PQ - Manual (Page 64)

60
CnF. 6
CONFIGURATION GROUP 6 [C.Ixx]
OTHER CONFIGURATION PARAMETERS
- Green bargraph function - [C.I01]
This parameter will be available for 25Q models only.
Range: Pr.Ur = the green bargraph will show the process
variable value.
DEV. = the green bargraph will show the deviation
(measured value minus set point).
- Orange bargraph function - [C.I02]
This parameter will be available for 25Q models only.
Range: OP.SP= On bargraph is shown the operative set point
value.
P.Out. = On bargraph is shown the process output value.
- Bargraph initial scale value - [C.I03]
This parameter will be available only when “G.brG” [C.I01] is
equal to “Pr.Ur” and/or “O.brG” [C.I02] is equal to “OP.SP”.
Range: From “ñ.In.L” ("Read-out initial scale value" [C.d05]) to
“ñ.In.H” ("Read-out full scale value [C.d06])
- Bargraph full scale value - [C.I04]
This parameter will be available only when “G.brG” [C.I01] is
equal to “Pr.Ur” and/or “O.brG” [C.I02] is equal to “OP.SP”.
Range: From “ñ.In.L” ("Read-out initial scale value" [C.d05]) to
“ñ.In.H” ("Read-out full scale value [C.d06])
XKP-1-C2.p65 10/30/01, 9:37 AM 60