Super Systems 9205 Series - Manual (Page 185)

Series 9205 Operations Manual Rev A 184
Field Factory Default Value
Output rate change limit, %/sec 0.0
PID Switch Variable Process variable
PID Loop 2 Setup
Prop Band (0 for On/Off) 4.0
Reset 0.10
Rate 0.00
Mode Single Reverse
Integral Preset 0
Cycle Time 60
Setpoint Change Limit OFF
Low Limit 0
High Limit 100
0 set point stops control no
IN1 high limit shuts down ctrl no
IN2 high limit shuts down ctrl no
IN3 high limit shuts down ctrl no
PID auto switch no
Switch Point PID 1->2 9999
Switch Point PID 2->3 9999
Setpoint Lower Limit -9999
Setpoint Upper Limit 29999
PV Source internal
Minimum Fwd On Time (sec) 0.00
Minimum Fwd Off Time (sec) 0.00
Minimum Rev On Time (sec) 0.00
Minimum Rev Off Time (sec) 0.00
Positive Output Accumulator 3273400.0
Negative Output Accumulator 0.0
Overshoot Control Logic no
Ramp Detect Logic no
Ramp Overshoot Control Level 1 no
Ramp Overshoot Control Level 2 no
Output rate change limit, %/sec 0.0
PID Switch Variable Process variable
PID Loop 3 Setup
Prop Band (0 for On/Off) 4.0
Reset 0.10
Rate 0.00
Mode Single Reverse
Integral Preset 0
Cycle Time 60
Setpoint Change Limit OFF
Low Limit 0