Super Systems 9205 Series - Manual (Page 41)

Series 9205 Operations Manual Rev A 40
User devices User 1 – 15 can also be selected.
The number below the list is the address for the slave instrument. The range is 0 – 25.
** All devices on the same slave port must utilize the same protocol
** An address of zero (0) will disable the instrument** Some controllers (AC20 for example) can provide
dual functions (atmosphere and events) and must have the same address assigned for both.
The slave port is next to the address. The Slave port option can be: Slave 1, Slave 2, or RS-232.
Some instruments may not be shown in the list of instruments. User Instruments 1 through 16 are used to
set up a non-listed instrument as a slave instrument using the Generic Instrument Setup menu.
The OK button will set the slave instrument, and the Cancel button will cancel the setup.
The Return button will return the user to the menu screen.