Super Systems 9205 Series - Manual (Page 94)

Series 9205 Operations Manual Rev A 93
Host 485 Address
This will set the address for RS-485 communications. The range is 1 – 247.
Slave 1 (5,6) Baud
This will set the baud rate for Slave 1 communications. The list of options is:
1200 14400 57600
2400 19200 76800
4800 28800 115200
9600 38400
Slave 1 (5,6) Mode
This will set the mode for Slave 1 communications. The list of options is:
Modbus Master
Yokogawa
Modbus Host
Slave 1 (5,6) Bits
This will set the data bits, parity, and stop bits (in that order). The list of options is:
8, none, 1
8, odd, 1
8, even, 1
8, none, 2
Slave 2 Baud
This will set the baud rate for Slave 2 communications. The list of options is:
1200 14400 57600
2400 19200 76800
4800 28800 115200
9600 38400
Slave 2 Mode
This will set the mode for Slave 2 communications. This list of options is:
MMI
Modbus
N/A
SSi Analog Input Board
Yokogawa
Slave 1 (5,6) Bits
This will set the data bits, parity, and stop bits (in that order). The list of options is:
8, none, 1
8, odd, 1
8, even, 1
8, none, 2
PLC Type
This value defines the type of PLC being used. The options are: Micrologix Modbus, MCMmodule Modbus,
DF1 PLC5, DF1 Slik, Passive.
Host 232-2 Baud
This will set the baud rate for RS-232 communications. The list of options is:
1200 14400 57600
2400 19200 76800
4800 28800 115200