ACTi NVR 2.3 Enterprise V2.3.04.07 User Manual
Page 101
NVR 2.3 (V2.3.05.11) User’s Manual
9. 64 window view
10. 6 window view
11. 8 window view
12. 10 window view
13. This is the subsection where you select the stream or channel ID to display on the current
preview window. If you are using a Dual-stream device, you may setup two different
streams in Camera Setup. By default NVR will accept live view only on media 1, while
recording can be done with either Media 1 or 2. In active Monitor, channels with dual
streams will by default preview in media 1. You may temporarily change the displayed
video stream to media 2 by clicking on
“2” here. This does not affect the recording, and the
live view will still use media 1 when you next refresh this layout. This way you may verify
that media 2 is acceptable to your recording needs, but do not need to keep decoding a
larger video stream in live view.