ACTi NVR 2.3 Enterprise V2.3.04.07 User Manual
Page 45
NVR 2.3 (V2.3.05.11) User’s Manual
Video quality tab:
1. Video Encoder: Show the codec of camera/video server
2. Stream Mode: Show whether the streaming mode is single or dual.
3. FPS: User can see the FPS (Frames Per Second) on this IP camera here. To modify it,
select the new one and click the Apply button.
4. Resolution: User can see the Resolution on this IP camera here. To modify it, enter
desired resolution and click the Apply button.
5. Bitrate Mode: Select Bitrate Mode of camera/video server
6. Video Quality: Select the expected video quality of camera/video server
Fig. 23 Camera Setup
– Advanced Setting – Video Adjustment
Video Adjustment tab:
1. Brightness: Adjust the brightness value either by clicking on the bar or selecting from the
drop down list.
2. Saturation: Adjust the Saturation value either by clicking on the bar or selecting from the
drop down list.
3. Contrast: Adjust the Contrast value either by clicking on the bar or selecting from the drop
down list.
NOTE: Some devices do not allow setting for some of these values.