ACTi NVR 2.3 Enterprise V2.3.04.07 - Manual (Page 62)

www.acti.com
NVR 2.3 (V2.3.05.11) User’s Manual
62
Event Manager
Event Manager describes how NVR responds to events from devices. You may configure the
event types and the responses to these events. An example would be for NVR to record video
when motion detection from camera is triggered, and send email to alert the supervisor.
Event List
Event list panel gives an overview on event setup for this device. The Event type column is the
original trigger from the device. The Name is shown on the Event panel so that you may easily
decide what exactly happened.
Fig. 36 Camera Setup – Event Manager - Setup
1. Delete: Click this button to delete all the settings on the event. Settings on other events are
not influenced. (e.g. only settings for MD1 are removed, while settings on MD2 and DI 1
are kept)
2. Apply: Click this button to save settings to NVR and device
3. Event type: User can see the list of event type here and select the event user wants to
trigger to modify it. The Action and Mail checkboxes indicate if there is any response
currently configured for this type of event.
4. Enable Action: After selecting an event, first user has to enable the function by checking it
and then select which action to take upon event.
5. Enable E-Mail Notification: If you wish to send email notification, you need to first enable