ACTi NVR 2.3 Enterprise V2.3.04.07 - Manual (Page 31)

www.acti.com
NVR 2.3 (V2.3.05.11) User’s Manual
31
2. There are four pre-defined roles. There may be more than one user in a given user role.
Administrator is the role that controls the whole system. Setups are only allowed for the
administrator. Standard User can operate the view and see the playbacks. Supervisor can
do what Standard User can do, plus export evidence and take snapshots. Guest users can
only see the live view.
3. If you have other combinations of allowed functions in mind, then you may create a new
User Role by typing the Role Name, Role Description and selecting the intended functions
in the list below. You need to first check the boxes to the left to enable the module, then
select the detail operations allowed for this role. Then click Apply to add this role to the
User Role list.
Defining Users
You may add users to NVR system by going to Active Setup → System Setup → Users
You may configure the User Account, User name, password, email Address, User Role and
Descriptions here. The camera groups available to this user are also selected here.