System setup, Camera groups – ACTi NVR 2.3 Enterprise V2.3.04.07 User Manual
Page 67
NVR 2.3 (V2.3.05.11) User’s Manual
System Setup
Camera Groups
Camera Group is an important layer of Camera management for NVR. User Permissions, View
Layouts and e-Maps are all based upon camera groups. Designing proper data groups in
advance is very important. One camera can belong to multiple groups at the same time, and
there
’s no limit to number of camera groups. Here’s how to setup Camera Groups.
Fig. 41 System Setup - Camera Groups
1. Group Name: Enter the user group name for a new camera group or to modify existing
camera group.
2. Group Description: Enter the description of this camera group.
3. Group List: User can see all the groups already created here.
4. Apply button: When you first enter the Camera group screen, you are by default in a
“ready to add new group” mode. You can just enter a group name and click “Apply” to add a
new camera group. You may also select a group from the list of existing camera groups
below and edit the group. Always click
“Apply” before leaving to preserve changes you’ve
made.
IMPORTANT:
Please do not delete default Camera Group. Default Camera Group is “No
Group”.