Ptz panel – ACTi NVR 2.3 Enterprise V2.3.04.07 User Manual
Page 97
NVR 2.3 (V2.3.05.11) User’s Manual
PTZ Panel
To use the PTZ control functions of PTZ cameras in Live view, please first configure the PTZ
protocol settings in NVR Setup System
→ PTZ setup page.
Fig. 79 Active Monitor - PTZ Panel
1. OSD: Click here to open On Screen Display for PTZ devices that use OSD menus.
2. Digital Zoom: Enable the Digital Zoom function for this device. You may zoom in, zoom out
and perform digital pan/tilt with this channel. You must zoom in first with Digital zoom to
perform digital PTZ.
3. Mouse PTZ: Enable PTZ control by mouse on the preview screen. Available only for PTZ
cameras. When you perform Mouse PTZ, your cursor icon will change with your position in
view. Depending upon its position on screen, the PTZ camera will Pan/Tilt with different
speed or zoom in/out. The below overlay image shows some of the possible cursor
images.