ACTi NVR 2.3 Enterprise V2.3.04.07 User Manual
Page 57
Advertising
NVR 2.3 (V2.3.05.11) User’s Manual
10. Absolute Position: Check this box to enable PTZ by absolute positioning. This option
appears only for certain devices
NOTE:
To use the PTZ functions of ACTi KCM cameras in NVR, you have to match the
camera’s PTZ Vendor and Protocol profile with NVR’s. Default is Vendor: ACTI and
Protocol: ACTI.
NOTE:
To use the PTZ functions of ACTi TCM-6630 speed dome camera in NVR, please
make sure you match the settings of Vendor, Baud rate and Protocol on camera control
protocol switch (on bottom of the device), camera firmware and NVR.
Advertising
This manual is related to the following products: