RIGOL DSG3000 Series - Manual (Page 101)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-81
[:SOURce]:PULM:WIDTh:STEP
Syntax [:SOURce]:PULM:WIDTh:STEP <value>
[:SOURce]:PULM:WIDTh:STEP?
Description Set the width step of the pulse modulating signal.
Query the width step of the pulse modulating signal.
Parameter Name Type Range Default
<value> Real 10ns to 10s 100us
Explanation  When <value> is set in "Number" form, the default unit is s. Besides, <value>
can also be set in "Number + Unit" form, for example, 3000ms.
 The default unit of the return value is s.
 After setting the pulse width step, you can use the up/down direction keys or
knob to modify the pulse width at the current step. At this point, you can query
or set the pulse width using the [:SOURce]:PULM:WIDTh command.
Return Format The query returns the width step of the pulse modulating signal, for example, 3.
Example :PULM:WIDT:STEP 3
:PULM:WIDT:STEP?
Related
Command
[:SOURce]:PULM:WIDTh