RIGOL DSG3000 Series - Manual (Page 62)

RIGOL Chapter 2 Command System
2-42 DSG3000 Programming Guide
[:SOURce]:LEVel:ATTenuation:MODE
Syntax [:SOURce]:LEVel:ATTenuation:MODE AUTO|FIXed
[:SOURce]:LEVel:ATTenuation:MODE?
Description Set the attenuation mode of the RF output amplitude.
Query the attenuation mode of the RF output amplitude.
Parameter Name Type Range Default
AUTO|FIXed Discrete AUTO|FIXed AUTO
Explanation  AUTO: select "Auto" attenuation mode.
 FIXed: select "Fixed" attenuation mode. At this point, you can set the
attenuation of the RF output amplitude using the
[:SOURce]:LEVel:ATTenuation command.
Return Format The query returns AUTO or FIX.
Example :LEV:ATT:MODE FIX
:LEV:ATT:MODE?
Related
Command
[:SOURce]:LEVel:ATTenuation
[:SOURce]:LEVel:ATTenuation:STEP
Syntax [:SOURce]:LEVel:ATTenuation:STEP <value>
[:SOURce]:LEVel:ATTenuation:STEP?
Description Set the RF amplitude attenuation step.
Query the RF amplitude attenuation step.
Parameter Name Type Range Default
<value> Integer 5dB to 100dB 5dB
Explanation  When <value> is set in "Number" form, the default unit is dB. Besides,
<value> can also be set in "Number+ Unit" mode, for example, 15dB.
 The attenuation step can only be multiples of 5.
 The default unit of the return value is dB.
 After the amplitude attenuation step is set, you can use the up/down direction
keys or knob to modify the attenuation at the current step. At this point, you
can query or set the amplitude attenuation using the
[:SOURce]:LEVel:ATTenuation command.
Return Format The query returns the RF amplitude attenuation step, for example, 15.00.
Example :LEV:ATT:STEP 15
:LEV:ATT:STEP?
Related
Command
[:SOURce]:LEVel:ATTenuation