RIGOL DSG3000 Series - Manual (Page 64)

RIGOL Chapter 2 Command System
2-44 DSG3000 Programming Guide
[:SOURce]:LEVel:LIMit:STEP
Syntax [:SOURce]:LEVel:LIMit:STEP <value>
[:SOURce]:LEVel:LIMit:STEP?
Description Set the step of the RF output amplitude limit.
Query the step of the RF output amplitude limit.
Parameter Name Type Range Default
<value> Real 0.01dB to 100dB 10dB
Explanation  When <value> is set in "Number" form, the default unit is dB. Besides,
<value> can also be set in "Number + Unit" form, for example, 4.5dB.
 The default unit of the return value is dB.
 After setting the step of the amplitude limit, you can use the up/down
direction keys or knob to modify the limit at the current step. At this point,
you can query or set the amplitude limit using the [:SOURce]:LEVel:LIMit
command.
Return Format The query returns the step of the RF output amplitude limit, for example, 4.50.
Example :LEV:LIM:STEP 4.5
:LEV:LIM:STEP?
Related
Command
[:SOURce]:LEVel:LIMit