RIGOL DSG3000 Series - Manual (Page 41)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-21
[:SOURce]:CORRection:FLATness:PAIR
Syntax [:SOURce]:CORRection:FLATness:PAIR <Freq>,<Ampt>
Description Set the correction point pair in the flatness table.
Parameter Name Type Range Default
<Freq> Real 9kHz to 6GHz 6GHz
<Ampt> Real -100dB to 100dB NULL
Explanation  You can use this command to edit the frequency and amplitude of the row
currently selected in the flatness table.
 <Freq>: set the frequency of the correction point.
 <Ampt>: set the amplitude corresponding to the frequency point.
Example :CORR:FLAT:PAIR 2.5M,10 /*Set the frequency of the row currently selected to
2.5MHz and the amplitude to 10dB*/
[:SOURce]:CORRection:FLATness[:STATe]
Syntax [:SOURce]:CORRection:FLATness[:STATe] ON|OFF|1|0
[:SOURce]:CORRection:FLATness[:STATe]?
Description Turn on or off the flatness correction switch.
Query the state of the flatness correction switch.
Parameter Name Type Range Default
ON|OFF|1|0 Bool ON|OFF|1|0 OFF
Return Format The query returns 1 or 0.
Example :CORR:FLAT ON /*Turn on the flatness correction function*/
:CORR:FLAT? /*The query returns 1*/
[:SOURce]:FM Command Subsystem
Command List:
 [:SOURce]:FM:DEViation
 [:SOURce]:FM:DEViation:STEP[:INCRement]
 [:SOURce]:FM:FREQuency
 [:SOURce]:FM:FREQuency:STEP[:INCRement]
 [:SOURce]:FM:SOURce
 [:SOURce]:FM:STATe
 [:SOURce]:FM:WAVEform