Source]:pulm:period – RIGOL DSG3000 Series User Manual
Page 91
RIGOL
DSG3000 Programming Guide
2-71
[:SOURce]:PULM:PERiod
Syntax
[:SOURce]:PULM:PERiod <value>
[:SOURce]:PULM:PERiod?
Description
Set the period of pulse modulation.
Query the period of pulse modulation.
Parameter
Name
Type
Range
Default
<value>
Real
40ns to 170s
500us
Explanation
When <value> is set in "Number" form, the default unit is s. Besides, <value>
can also be set in "Number + Unit" form, for example, 1000ms.
The default unit of the return value is s.
The single pulse or double pulse modulation period is related to the current
"Mode" setting.
After setting the pulse period, you can use the up/down direction keys or knob
to modify the period at the current step. At this point, you can query or set the
current step using the
This command is invalid when "Ext" modulation source is selected or "Train"
pulse mode is selected.
Return Format
The query returns the period of pulse modulation, for example, 1.
Example
:PULM:PER 1000ms
:PULM:PER?
Related
Commands
[:SOURce]:PULM:PERiod:STEP
[:SOURce]:PULM:SOURce
[:SOURce]:PULM:MODE