RIGOL DSG3000 Series - Manual (Page 144)

RIGOL Chapter 2 Command System
2-124 DSG3000 Programming Guide
:SYSTem:COMMunication:LAN:IP:SET
Syntax :SYSTem:COMMunication:LAN:IP:SET
Description Apply the current network parameter settings.
Explanation After setting the LAN parameters, you have to execute this command to apply the
parameters. Otherwise, the settings are invalid.
:SYSTem:COMMunication:LAN:IP:SUBnet:MASK
Syntax :SYSTem:COMMunication:LAN:IP:SUBnet:MASK <value>
:SYSTem:COMMunication:LAN:IP:SUBnet:MASK?
Description Set the subnet mask.
Query the current subnet mask.
Parameter Name Type Range Default
<value> ASCII string
The format is nnn.nnn.nnn.nnn and
the range of the nnn is from 0 to
255.
NULL
Explanation  This command is only valid when Manual-IP configuration mode is turned on.
 You are recommended to ask your network administrator for a subnet mask
available.
Return Format The query returns the current subnet mask, for example, 255.255.255.0.
Example :SYST:COMM:LAN:IP:SUB:MASK 255.255.255.0
:SYST:COMM:LAN:IP:SUB:MASK?
Related
Command
:SYSTem:COMMunication:LAN:IP:MANual
:SYSTem:COMMunication:LAN:RESet
Syntax :SYSTem:COMMunication:LAN:RESet
Description Reset the current network parameters.
Explanation After resetting the current parameters, DHCP and Auto-IP are turned on and
Manual-IP is turned off.