RIGOL DSG3000 Series - Manual (Page 50)

RIGOL Chapter 2 Command System
2-30 DSG3000 Programming Guide
[:SOURce]:IQ Command Subsystem
Command List
[2] :
 [:SOURce]:IQ:BASeout:LEVel
 [:SOURce]:IQ:BASeout:LEVel:STEP
 [:SOURce]:IQ:BASeout:STATe
 [:SOURce]:IQ:MODe
 [:SOURce]:IQ:MODe:STATe
 [:SOURce]:IQ:SAMPle
 [:SOURce]:IQ:SAMPle:STEP
 [:SOURce]:IQ:TRIGger:ARB
 [:SOURce]:IQ:TRIGger:DELay
 [:SOURce]:IQ:TRIGger:DELay:STEP
 [:SOURce]:IQ:TRIGger:DURation
 [:SOURce]:IQ:TRIGger:DURation:STEP
 [:SOURce]:IQ:TRIGger:INHibit
 [:SOURce]:IQ:TRIGger:INHibit:STEP
 [:SOURce]:IQ:TRIGger:MODe
 [:SOURce]:IQ:TRIGger:OPTMode
Note [2] : If you want to use IQ-related commands, please order the RF signal generator with the IQ-DSG3000 option.
Otherwise, the command setting is invalid.