RIGOL DSG3000 Series - Manual (Page 117)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-97
[:SOURce]:SWEep:STEP:STOP:LEVel:STEP
Syntax [:SOURce]:SWEep:STEP:STOP:LEVel:STEP <value>
[:SOURce]:SWEep:STEP:STOP:LEVel:STEP?
Description Set the stop level step of the sweep.
Query the stop level step of the sweep.
Parameter Name Type Range Default
<value> Real 0.01dB to 100dB 1dB
Explanation  When <value> is set in "Number" form, the default unit is dB. Besides,
<value> can also be set in "Number + Unit" form, for example, 20dB.
 The default unit of the return value is dBm.
 After setting the stop level step, you can use the up/down direction keys or
knob to modify the stop level at the current step. At this point, you can query
or set the stop level using the [:SOURce]:SWEep:STEP:STOP:LEVel command.
Return Format The query returns the stop level step of the sweep, for example, 20.000000.
Example :SWE:STEP:STOP:LEV:STEP 20
:SWE:STEP:STOP:LEV:STEP?
Related
Command
[:SOURce]:SWEep:STEP:STOP:LEVel