Trigger commands, Trigger:iq[:immediate, Trigger:lfoutput[:immediate – RIGOL DSG3000 Series User Manual
Page 150: Trigger:pulse[:immediate, Trigger commands -130, Trigger:iq[:immediate] -130, Trigger:lfoutput[:immediate] -130, Trigger:pulse[:immediate] -130
RIGOL
2-130
DSG3000 Programming Guide
:TRIGger Commands
Command List:
:TRIGger:LFOutput[:IMMediate]
:TRIGger[:SWEep][:IMMediate]
:TRIGger:IQ[:IMMediate]
Syntax
:TRIGger:IQ[:IMMediate]
Description
Trigger an IQ wave table output immediately.
Explanation
When the trigger mode of IQ wave table is set to "Bus", the instrument starts outputting
an IQ baseband signal each time this command is sent.
Example
:TRIG:IQ
Related
Command
:TRIGger:LFOutput[:IMMediate]
Syntax
:TRIGger:LFOutput[:IMMediate]
Description
Trigger a LF sweep-sine immediately.
Explanation
When the trigger mode of LF sweep-sine is set to "Bus" and the trigger condition is met,
the instrument starts a sweep each time this command is sent.
Example
:TRIG:LFO
Related
Command
:TRIGger:PULSe[:IMMediate]
Syntax
:TRIGger:PULSe[:IMMediate]
Description
Trigger a pulse modulation immediately.
Explanation
When the "Trig Mode" of PULSE is set to "Bus", the instrument starts a pulse modulation
each time this command is sent.
Example
:TRIG:PULS
Related
Command