Application examples, Chapter 3 application examples, Chapter 3 – RIGOL DSG3000 Series User Manual
Page 153: Application examples -1
Chapter 3 Application Examples
RIGOL
DSG3000 Programming Guide
3-1
Chapter 3 Application Examples
This chapter provides some application examples of the SCPI commands. A series of SCPI commands are
combined to realize the main functions of the RF signal generator.
Note:
1. The examples in this chapter are based on DSG3060. For other models, the ranges of some
parameters might be different. When using the commands, please make proper adjustment according
to the model of your instrument.
2. Before using the examples in this chapter, please select the desired communication interface (USB,
LAN, or GPIB) and make correct connections (refer to the introductions in
). Besides, you have to install Ultra Sigma or other PC software for sending commands
on your PC.
3. The content enclosed in "/*" and "*/" after each command is annotation for easier understanding and
is not a part of the command.
Main topics of this chapter:
To Output RF Modulated Signal