RIGOL DSG3000 Series - Manual (Page 97)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-77
[:SOURce]:PULM:TRIGger:DELay:STEP
Syntax [:SOURce]:PULM:TRIGger:DELay:STEP <value>
[:SOURce]:PULM:TRIGger:DELay:STEP?
Description Set the pulse trigger delay step.
Query the pulse trigger delay step.
Parameter Name Type Range Default
<value> Real 10ns to 10s 100us
Explanation  When <value> is set in "Number" form, the default unit is s. Besides, <value>
can also be set in "Number + Unit" form, for example, 50ms.
 The default unit of the return value is s.
 After setting the trigger delay step, you can use the up/down direction keys or
knob to modify the trigger delay at the current step. At this point, you can query
or set the trigger delay using the [:SOURce]:PULM:TRIGger:DELay command.
Return Format The query returns the trigger delay step, for example, 5.
Example :PULM:TRIG:DEL:STEP 5 /*Set the trigger delay step to 5s*/
:PULM:TRIG:DEL:STEP?
Related
Command
[:SOURce]:PULM:TRIGger:DELay
[:SOURce]:PULM:TRIGger:EXTernal:GATE:POLarity
Syntax [:SOURce]:PULM:TRIGger:EXTernal:GATE:POLarity NORMal|INVerse
[:SOURce]:PULM:TRIGger:EXTernal:GATE:POLarity?
Description Set the polarity of the external geted signal.
Query the polarity of the external gated signal.
Parameter Name Type Range Default
NORMal|INVerse Discrete NORMal|INVerse NORMal
Explanation  When the trigger mode of pulse modulation is set to "Ext Gate", the RF signal
generator receives the external gated signal input from the [PULSE IN/OUT]
connector at the rear panel. At this point, you can use this command to set the
polarity of the external gated signal.
 The parameter NORMal|INVerse can set the polarity of the external gated
signal to "Normal" or "Inverse".
 This command is invalid when "Ext" modulation source is selected.
Return Format The query returns NORMAL or INVERSE.
Example :PULM:TRIG:EXT:GATE:POL INV
:PULM:TRIG:EXT:GATE:POL?
Related
Commands
[:SOURce]:PULM:TRIGger:MODE
[:SOURce]:PULM:SOURce