RIGOL DSG3000 Series - Manual (Page 81)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-61
[:SOURce]:PM:DEViation
Syntax [:SOURce]:PM:DEViation <value>
[:SOURce]:PM:DEViation?
Description Set the phase deviation of ØM.
Query the phase deviation of ØM.
Parameter Name Type Range Default
<value> Real 0rad to 20rad 6.28rad
Explanation  When <value> is set in "Number" form, the default unit is rad. Besides,
<value> can also be set in "Number + Unit" form, for example, 2rad.
 The default unit of the return value is rad.
 After setting the phase deviation, you can use the up/down direction keys or
knob to modify the phase deviation at the current step. At this point, you can
query or set the current step using the
[:SOURce]:PM:DEViation:STEP[:INCRement] command.
Return Format The query returns the phase deviation of ØM, for example, 2.000000.
Example :PM:DEV 2
:PM:DEV?
Related
Command
[:SOURce]:PM:DEViation:STEP[:INCRement]
[:SOURce]:PM:DEViation:STEP[:INCRement]
Syntax [:SOURce]:PM:DEViation:STEP[:INCRement] <value>
[:SOURce]:PM:DEViation:STEP[:INCRement]?
Description Set the ØM phase deviation step.
Query the ØM phase deviation step.
Parameter Name Type Range Default
<value> Real 0.01rad to 10rad 1rad
Explanation  When <value> is set in "Number" form, the default unit is rad. Besides,
<value> can also be set in "Number + Unit" form, for example, 3rad.
 The default unit of the return value is rad.
 After setting the phase deviation step, you can use the up/down direction
keys or knob to modify the phase deviation at the current step. At this point,
you can query or set the phase deviation using the
[:SOURce]:PM:DEViation command.
Return Format The query returns the phase deviation step (3.000000).
Example :PM:DEV:STEP 3
:PM:DEV:STEP?
Related
Command
[:SOURce]:PM:DEViation