RIGOL DSG3000 Series - Manual (Page 66)

RIGOL Chapter 2 Command System
2-46 DSG3000 Programming Guide
[:SOURce]:LEVel:OFFSet:STEP
Syntax [:SOURce]:LEVel:OFFSet:STEP <value>
[:SOURce]:LEVel:OFFSet:STEP?
Description Set the step of the RF amplitude offset.
Query the step of the RF amplitude offset.
Parameter Name Type Range Default
<value> Real 0.01dB to 200dB 10dB
Explanation  When <value> is set in "Number" form, the default unit is dB. Besides,
<value> can also be set in "Number + Unit" form, for example, 20dB.
 The default unit of the return value is dB.
 After setting the step of the amplitude offset, you can use the up/down
direction keys or knob to modify the amplitude offset at the current step. At
this point, you can query or set the amplitude offset using the
[:SOURce]:LEVel:OFFSet command.
Return Format The query returns the step of the RF amplitude offset, for example, 20.00.
Example :LEV:OFFS:STEP 20
:LEV:OFFS:STEP?
Related
Command
[:SOURce]:LEVel:OFFSet
[:SOURce]:LEVel:SH:ACTIve
Syntax [:SOURce]:LEVel:SH:ACTIve
Description Execute a sample hold operation immediately.
Explanation This command is valid when the ALC function is disabled.
Related
Command
[:SOURce]:LEVel:ALC:MODE