Source]:input:trigger:slope, Source]:input:trigger:slope -29 – RIGOL DSG3000 Series User Manual
Page 49
Advertising
RIGOL
DSG3000 Programming Guide
2-29
[:SOURce]:INPut:TRIGger:SLOPe
Syntax
[:SOURce]:INPut:TRIGger:SLOPe POSitive|NEGative
[:SOURce]:INPut:TRIGger:SLOPe?
Description
Set the polarity of the external trigger signal.
Query the polarity of the external trigger signal.
Parameter
Name
Type
Range
Default
POSitive|NEGative
Discrete
POSitive|NEGative
POSitive
Explanation
This command is valid only when the trigger mode of SWEEP or "Swp-Sine" of
LF output is "Ext".
The external trigger signal is input from the [TRIGGER IN] connector at the
rear panel.
Return Format
The query returns POS or NEG.
Example
:INP:TRIG:SLOP POS
:INP:TRIG:SLOP?
Advertising