RIGOL DSG3000 Series - Manual (Page 78)

RIGOL Chapter 2 Command System
2-58 DSG3000 Programming Guide
[:SOURce]:LFOutput:SWEPtsine:XPOLar
Syntax [:SOURce]:LFOutput:SWEPtsine:XPOLar NEG|POS
[:SOURce]:LFOutput:SWEPtsine:XPOLar?
Description Set the external trigger polarity of sweep-sine.
Query the external trigger polarity of sweep-sine.
Parameter Name Type Range Default
NEG|POS Discrete NEG|POS POS
Explanation  The parameter NEG|POS can set the polarity of the external trigger signal of
sweep-sine to "Neg" or "Pos".
 This command is only valid when the trigger mode of sweep-sine is currently
set to "Ext".
Return Format The query returns NEG or POS.
Example :LFO:SWEP:XPOL NEG
:LFO:SWEP:XPOL?
Related
Command
[:SOURce]:LFOutput:SWEPtsine:TRIGger
[:SOURce]:MODulation:STATe
Syntax [:SOURce]:MODulation:STATe ON|OFF|1|0
[:SOURce]:MODulation:STATe?
Description Turn on or off all the modulation outputs.
Query the on/off state of all the modulation outputs.
Parameter Name Type Range Default
ON|OFF|1|0 Bool ON|OFF|1|0 OFF
Explanation  ON: turn on all the modulation outputs. The backlight of the MOD output
control key turns on.
 OFF: turn off all the modulation outputs. The backlight of the MOD output
control key turns off.
Return Format The query returns 1 or 0.
Example :MOD:STAT ON /*Turn on all the modulation outputs*/
:MOD:STAT? /*The query returns 1*/
[:SOURce]:PHASe Command Subsystem
Command List:
 [:SOURce]:PHASe
 [:SOURce]:PHASe:RESet
 [:SOURce]:PHASe:STEP[:INCRement]