RIGOL DSG3000 Series User Manual
Page 5
RIGOL
DSG3000 Programming Guide
III
Do Not Operate in an Explosive Atmosphere.
In order to avoid damage to the device or personal injuries, it is important to operate the device away from
an explosive atmosphere.
Keep Product Surfaces Clean and Dry.
To avoid the influence of dust and/or moisture in the air, please keep the surface of the device clean and
dry.
Electrostatic Prevention.
Operate the instrument in an electrostatic discharge protective environment to avoid damage induced by
static discharges. Always ground both the internal and external conductors of cables to release static before
making connections.
Proper Use of Battery.
If a battery is supplied, it must not be exposed to high temperature or in contact with fire. Keep it out of the
reach of children. Improper change of battery (note: lithium battery) may cause explosion. Use
RIGOL
specified battery only.
Do Not Overload the Output.
In order to avoid damage to the instrument, the reverse DC voltage on the RF output connector cannot
exceed 50 V; the reverse power must be less than +40 dBm (10 W) in the frequency range from 1 MHz to
6 GHz.
Handling Safety.
Please handle with care during transportation to avoid damage to keys, knob interfaces and other parts on
the panels.